2t posi-track skidsteer loader Dry Hire Perth & WA - manitou 1050rt
request a quote
small and powerful loader for tight access earthWorks
The Heavy Duty Hire 2 tonne posi track loader is a Manitou 1050RT, maintained to manufacturer standards and available for dry hire across Perth metro and regional Western Australia.
Compact, highly manoeuverable and built for all terrain, the 1050RT operates effectively on soft, uneven and access-restricted ground where wheeled machines can't perform. Equipped with rubber tracks and a full attachment range, this machine earns its place on a wide variety of civil and construction sites.
Spec Sheet [CLICK HERE]
What the 2T POSI TRACK IS BEST USED FOR
Material handling, stockpile management and site clean-ups
Backfilling trenches and compacting in confined areas
Turf preparation, topsoil spreading and landscaping works
Site preparation and light earthworks in tight or sensitive areas
Clearing and grading on residential and civil subdivisions
Loading and unloading materials where wheeled machines are impractical
WHY CONTRACTORS CHOOSE HDH FOR POSI TRACK HIRE
When you hire the HDH 2T Posi Track, you get a machine that arrives clean, serviced and pre-delivery inspected. Service records and compliance documentation are available to support your site induction. GPS tracked for security.
Direct contact with the owner - no call centre, no hire desk. Call 0452 692 150 for same-day availability and quotes.
Machine specifications
Operating weight: 2,141 kg
Rated operating capacity (35%): 476 kg
Rated operating capacity (50%): 680 kg
Engine: Yanmar 3TNV88C-KMS, 25.5 kW (34.7 hp) — Tier IV
Height to hinge pin (fully raised): 2,769 mm
Dump height (fully raised): 2,134 mm
Overall width (less bucket): 1,290 mm
Track width: 250 mm
Ground speed: 10.1 km/h
Auxiliary hydraulic flow: 55 L/min
Full specification sheet available — see link above.
[Back to all LOADERS
→ hdhire.net/LOADERS]
Dry Hire - Minimum One Week
All HDH loaders are supplied on a dry hire basis. Minimum hire period is one week. Delivery and collection available across all of WA. Call for urgent or short-notice requirements.
Frequently Asked Questions
Q: What attachments are available with the Manitou 1050RT 2T posi track?
A: The Manitou 1050RT can be supplied with a range of attachments including general purpose bucket, 4-in-1 bucket, forks, auger, trencher and spreader bar.
Contact us to confirm the right setup for your scope.
Q: Is the 2T posi track suitable for tight access and residential sites?
A: Yes. The compact footprint of the 1050RT makes it ideal for tight access work, residential construction, landscaping and confined civil sites while still delivering strong lifting capacity.
Q: Is the Manitou 1050RT available for wet hire?
A: No. This machine is offered on a dry hire basis only and must be operated by a suitably qualified and experienced operator.
Q: Can the Manitou 1050RT be hired for long-term projects?
A: Yes. Long-term dry hire is available and preferred for ongoing civil, commercial and infrastructure works.
We recommend booking early to secure availability.
Q: Do you offer delivery to regional and remote locations?
A: Yes. HDH can arrange delivery across metropolitan, regional and remote areas.
Transport is quoted based on site location and access requirements.
Q: What is the lifting capacity of the Manitou 1050RT?
A: The 1050RT has an operating capacity of approximately 1,050kg, making it well suited for material handling, pallet movement and general site duties.
Q: What are the operator requirements for dry hire?
A: The hirer is responsible for providing a competent and experienced operator. All operators must comply with site, safety and licensing requirements relevant to the works being undertaken.
Q: What are the hire rates for the Manitou 1050RT?
A: Rates are dependent on hire duration, attachments required, delivery location and availability.
Call 0452 692 150 or submit an enquiry for a same-day quote.